With constant use, asphalt driveways are prone to damage. Starting with a small crack, driveway damage can develop to serious levels where you may just need to replace the driveway completely. Fortunately, reliable companies also exist to contain the problems as soon as they get noticed. For example, in Melbourne, you can engage reliable contractors for asphalt driveways Melbourne has to offer.
Materials for fixing asphalt damages
Three types of materials exist in the market, which you can use to maintain or repair minor cracks on your driveway. They include plastic fillers, solid cold-patches, and liquid emulsifiers. You can get more information about relevant products from certified suppliers and contractors for asphalt driveways Melbourne has to offer. For complete maintenance, you may need all the three products.
Signs of bad damages
It is important to check your driveway condition before you carry out any maintenance practice. A common sign to look for is car tire impressions after overnight parking. This can be a sign of poor construction. You should also check if your driveway tilts or heaves during cold weather, which can be an indication of poor drainage. Other signs of bad damage on a driveway include buckling or cracking during spring.
A permanent solution to the problems may be to replace the entire driveway. Fortunately, problems of such magnitudes are rare as long as you engage a reliable contractor for asphalt driveways Melbourne has to offer. Asphalt contractors are experienced in their trade and once you sign a contract for the service, you can expect the best results.
Common driveway damages
However, lesser-degree damages also occur to driveways. Such problems include chuckholes, minor cracks, and crumbling of the driveway. For such conditions, you can apply appropriate methods and materials to bring your driveway back to normal. You can use varying materials to treat the conditions based on their nature and size.
Before you engage a reliable contractor for commercial asphalt services Melbourne has to offer, you should understand the type of damage you are dealing with. You can involve your local supplier to get the products required for treating minor damages on asphalt driveways. Here are steps to follow when dealing with minor cracks on driveways.
Step#1: seal any crack on the surface as soon as possible to avoid water from seeping below the slab to cause more problems that are serious.
Step#2: cracks that are a half-inch wide require sealing with asphalt cold patch, which is often available in local stores. You can find out about asphalt driveway Melbourne cost from reliable suppliers.
Step#3: use appropriate tools such as mason chisel, or wire brush to clean the crack and leave it open for sealing. Remove all the dust from the crack using a garden hose or a vacuum cleaner. This makes the crack receive the sealing materials properly.
Step#4: when the crack is clear, fill it three-quarters full with a plastic filler before you apply a final patching material on the surface.
Sealing minor cracks on driveway yourself can help you save money in the end. Follow the right method and use the right materials and you will get it right.